info@leaditop.com

Оставить сообщение

+86 13391004727

Поговорите с экспертом

Индивидуальные решения по фотоуправлению для производителей осветительного оборудования: защита от напряжения, люкс, перенапряжения и варианты интерфейса.

Оглавление

Two lighting brands can order the same nominal automatic light sensor and need two different products. One needs a different turn-on threshold for its latitude. Another needs a different voltage window for its grid, a different fail mode for its road class, or a different surge tier for its lightning zone.

Catalogue models cover most of this through options. Where the options end, Lead-Top’s OEM/ODM development begins.

This guide covers what can be customised, what is already a standard option, how development runs, and what to prepare before requesting a quotation.

Автоматизированная производственная линия на заводе фотоконтроллеров Lead Top.

Why Do Lighting OEMs Need a Customised Light Sensor Switch?

Needs differ along four lines:

DifferenceExamples
ЭлектрооборудованиеSupply voltage by market
120V North America
220–230V Europe and Asia
347–480V industrial
AC or DC circuits
Driver load profiles
КонтрольTurn-on люкс for latitude and light-pollution rules
Time delay for traffic speed and fog
Fail mode by road class
Dimming where the driver supports it
ДизайнInternal space for wire-in controls
Housing colour
Branding and packaging
РынокСемейство интерфейсов
ANSI C136.10/C136.41 in the Americas
Жага Книга 18 in European smart programmes
Certification and documentation

The cost framing

Customisation is cheapest when it uses existing configurable options. It only grows when it needs a true development loop. A good supplier tells you which one you are in.

What Photocontrol Specifications Can Be Customised?

Электрооборудование

  • Номинальное напряжение

Multi-voltage windows exist. The LT124 family operates down to 80VAC, the LT124L to 90VAC, and the LT104 to 95VAC.

  • Load class

2A, 5A or 8A E-Ballast.

  • Frequency and AC/DC versions

The LT104-DC covers 12–24VDC and the LT310A covers 12–48VDC for solar and low-voltage lighting.

Управление освещением

  • Turn-on lux level

Such as the 15, 26, and 37 lux options on the LT124L, plus the turn-off ratio.

  • Задержка времени

From 2–5 seconds up to 30–35 second options.

  • Режим отказа

Fail-ON or Fail-OFF.

Защита от перенапряжения

  • On the LT124L, 320J is standard, with 640, 960, and 1,280J options.
  • Other families run from 160J up to 950J and beyond, at 6kV, 10kV or 20kV surge levels, depending on model.
  • Tier selection is a project evaluation, not a menu item on every model.

Structure, interface and presentation

  • Twist-lock, wire-in, or Zhaga controller form
  • НЕМА (C136.10 / C136.41) or Zhaga Book 18 interface
  • Housing size and sealing, IP66 or IP67 options
  • Cover colour, base design, logo, packaging and labels

Standard Options vs. Project-Based Customisation: What’s the Difference?

Row of blue, white, black, yellow and grey photocells with icons for surge protection, custom lux, voltage options and interface choices

Every OEM buyer needs this line drawn plainly. Some parameters are orderable options on catalogue models. Others enter a development evaluation.

The clearest example is the LT124L part-number system. Take LT124L-BU-F15-D05-NO-M10-66:

КодMeaningКодMeaning
BUCover colourF15Уровень включения
D05Задержка времениNOРежим отказа
M10MOV tier66Степень защиты IP

Configuring a variant like this is a purchase order. Inventing a new variant is a project.

The logic is the same for Wire-in controls. The LT310A selection code makes load, switching, and fail mode explicit order options:

  • E-Ballast: 1 = 2A, 2 = 5A
  • Z: zero-cross switching
  • F: Fail-OFF

Can You Get a Photocell With Custom Turn-On Lux, Colour, Logo and Packaging?

Yes, within the limits of each model’s options. The lux level is a configurable option on models such as the LT124L street light controller, which makes a custom lux level photocell a standard order rather than a development project.

For appearance and presentation, private label photocell manufacturer programmes usually cover:

Housing palette

Grey, yellow, transparent blue, black, brown, transparent, blue and green, with UV-stabilised PC covers and PBT bases.

Логотип

Printed or molded, with options and minimums set per project.

Упаковка

Standard export packing or branded retail and bulk packaging, with label language and content per market.

Confirm marking methods and MOQs with Lead-Top before you commit to a design.

Which Interface Should You Choose: NEMA, Zhaga or Wire-In?

ИнтерфейсProductsЛучше всего подходит для
NEMA twist-lock (ANSI C136.10)LT110 / LT124L photocells with LT615-family 3-pin receptaclesStandard on/off switching
NEMA dimming receptacle (ANSI C136.41)Dimming photocontrol line with LT605 / LT605R / LT635 receptacles, 5-pin and 7-pinDimming; fixed, rotatable, or tool-free 360°
Жага Книга 18LT600 receptacle with LT6001 (0–10V) and LT6002 (DALI) controllersEuropean smart-ready programmes
Wire-in controllersLT310A (120–277V, IR sensor, >10,000 cycles) and LT210 thermal seriesLuminaire-internal mounting; DC versions for solar

Category discipline: receptacles, photo switch sensors, and controllers are different product classes. Customisation confirms interface and electrical requirements separately for each.

How Does the OEM Photocontrol Development Process Work?

Engineer holding a white twist-lock photocell beside CAD drawings on a monitor

For an ODM photocontrol receptacle supplier, the process runs in six steps:

  • Шаг 1

Requirement discussion. Application, technical requirements, estimated quantity, and target market.

  • Шаг 2

Technical evaluation. The factory reviews electrical parameters, structure, interface, and feasibility.

  • Шаг 3

Sample development. Samples are prepared against confirmed requirements.

  • Шаг 4

Sample testing and confirmation. You test them. Performance, structure, and appearance are then frozen.

  • Шаг 5

Mass production against the confirmed specification.

  • Step 6

Quality inspection and delivery.

Honest boundary

Development cycles, sample costs, and MOQs are set per project. We don’t quote fixed lead times before the evaluation.

What Should You Prepare Before Requesting a Quote?

A filled specification sheet gets a faster, more accurate answer.

InformationDetails to provideInformationDetails to provide
Required voltageAC or DC, supply window, frequencyНоминальная нагрузкаLoad type and rating, LED driver class
Тип продуктаTwist-lock, wire-in or ZhagaИнтерфейсNEMA C136.10 / C136.41 / Zhaga Book 18 / other
Управление освещениемTurn-on lux, delay, fail modeЗащита от перенапряженияMOV tier or surge level for the site’s exposure
ПоявлениеCover colour, base design, logoУпаковкаStandard or branded
КоличествоInitial and annual estimateПриложениеStreet, area, parking, solar and so on

Which Applications Does the Custom Range Cover?

  • Street and roadway: 3-pin switching or 5/7-pin dimming packages.
  • Area, parking and industrial: higher-load models such as the LT134 (8A) and LT154 (programmable), with higher surge tiers.
  • Solar and low-voltage: LT104-DC (12–24VDC) and LT310A (12–48VDC) wire-in.
  • Smart-ready programmes: the Zhaga Book 18 package.

Each application ties a requirement (voltage, load, interface) to a product class. No product fits every scene.

Where Does Customisation Start?

For OEM photoelectric sensor programmes, customisation starts with the configurable families:

It extends through the receptacle and Zhaga lines

  • The LT615 family
  • LT605/LT605R/LT635
  • LT600/LT6001/LT6002

Часто задаваемые вопросы

What is the MOQ for a custom twist-lock photocell?

It depends on the layer. Configuring existing options, such as lux level, delay, fail mode, or MOV tier through part-number suffixes, follows the base model’s standard MOQ. Structural or appearance development is quoted per project. Send your specification, and Lead-Top will confirm the tier.

Which parameters can be customised without new development?

On the LT124L, cover colour, turn-on lux level, time delay, fail mode, MOV tier, and IP rating are part-number options. On the LT310A, load class, zero-cross switching and fail mode are selection-code options. Everything else enters project evaluation.

Can you supply 220–230V, 50Hz markets?

Yes. Voltage options exist across the range, including an LT110 220V option, wide-window electronic models operating down to 80–90VAC, and DC versions for solar. Confirm the exact window and load against the configured model’s datasheet.

Can a photocell factory take ODM projects to my own design?

Lead-Top works from your technical specifications, product drawings, and estimated quantity. The six-step process above sets how an ODM project moves from requirements to production.

How long does OEM sample development take?

It depends on how far the request sits from an existing configurable model. Suffix-level configurations follow normal order lead time. New structures or electronics follow the development process, with a timeline set at technical evaluation. We don’t quote fixed periods beforehand.

What documents come with an OEM order?

A datasheet matching the exact configured part number, surge and endurance test reports on request, certification documents for the product family, and units individually marked with date and batch codes.

Заключительные слова

Most OEM requirements, from lux levels to MOV ratings and cover colours, are configuration options rather than new development. Share your project details with Свинцовый-Топ to identify the right solution. The engineering team will provide a configured part number, sample plan, and supporting test data.

Внешние ссылки

Фейсбук
Твиттер
LinkedIn
WhatsApp
Изображение Sophia
Софья

Здравствуйте, я автор поста. Имея 10-летний опыт работы в сфере освещения, я увлечен инновациями и связями. Присоединяйтесь ко мне в изучении отраслевых идей и формировании будущего. Давайте освещать вместе!

Получить бесплатную смету
Получить бесплатную смету

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Подпишитесь на нашу рассылку!

Будьте в курсе событий с эксклюзивными обновлениями.

«Чтобы получать информацию о тенденциях рынка управления освещением, новостях отрасли и новых выпусках продукции».