Soluções personalizadas de fotocontrole para fabricantes de equipamentos originais (OEMs) de iluminação: opções de tensão, lux, proteção contra surtos e interfaces.

Índice

Two lighting brands can order the same nominal automatic light sensor and need two different products. One needs a different turn-on threshold for its latitude. Another needs a different voltage window for its grid, a different fail mode for its road class, or a different surge tier for its lightning zone.

Catalogue models cover most of this through options. Where the options end, Lead-Top’s OEM/ODM development begins.

This guide covers what can be customised, what is already a standard option, how development runs, and what to prepare before requesting a quotation.

Linha de produção automatizada dentro da fábrica de fotocontroladores Lead Top.

Why Do Lighting OEMs Need a Customised Light Sensor Switch?

Needs differ along four lines:

DifferenceExamples
ElétricaSupply voltage by market
120V North America
220–230V Europe and Asia
347–480V industrial
AC or DC circuits
Driver load profiles
ControlarTurn-on luxo for latitude and light-pollution rules
Time delay for traffic speed and fog
Fail mode by road class
Dimming where the driver supports it
ProjetoInternal space for wire-in controls
Housing colour
Branding and packaging
MercadoFamília de interfaces
ANSI C136.10/C136.41 in the Americas
Zhaga Livro 18 in European smart programmes
Certification and documentation

The cost framing

Customisation is cheapest when it uses existing configurable options. It only grows when it needs a true development loop. A good supplier tells you which one you are in.

What Photocontrol Specifications Can Be Customised?

Elétrica

  • Tensão nominal

Multi-voltage windows exist. The LT124 family operates down to 80VAC, the LT124L to 90VAC, and the LT104 to 95VAC.

  • Load class

2A, 5A or 8A E-Ballast.

  • Frequency and AC/DC versions

The LT104-DC covers 12–24VDC and the LT310A covers 12–48VDC for solar and low-voltage lighting.

Controle de luz

  • Turn-on lux level

Such as the 15, 26, and 37 lux options on the LT124L, plus the turn-off ratio.

  • Atraso de tempo

From 2–5 seconds up to 30–35 second options.

  • Modo de falha

Fail-ON or Fail-OFF.

Proteção contra surtos

  • On the LT124L, 320J is standard, with 640, 960, and 1,280J options.
  • Other families run from 160J up to 950J and beyond, at 6kV, 10kV or 20kV surge levels, depending on model.
  • Tier selection is a project evaluation, not a menu item on every model.

Structure, interface and presentation

  • Twist-lock, wire-in, or Zhaga controller form
  • NEMA (C136.10 / C136.41) or Zhaga Book 18 interface
  • Housing size and sealing, IP66 or IP67 options
  • Cover colour, base design, logo, packaging and labels

Standard Options vs. Project-Based Customisation: What’s the Difference?

Row of blue, white, black, yellow and grey photocells with icons for surge protection, custom lux, voltage options and interface choices

Every OEM buyer needs this line drawn plainly. Some parameters are orderable options on catalogue models. Others enter a development evaluation.

The clearest example is the LT124L part-number system. Take LT124L-BU-F15-D05-NO-M10-66:

CódigoMeaningCódigoMeaning
BUCover colourF15Nível de ativação
D05Atraso de tempoNOModo de falha
M10MOV tier66Classificação IP

Configuring a variant like this is a purchase order. Inventing a new variant is a project.

The logic is the same for Wire-in controls. The LT310A selection code makes load, switching, and fail mode explicit order options:

  • E-Ballast: 1 = 2A, 2 = 5A
  • Z: zero-cross switching
  • F: Fail-OFF

Can You Get a Photocell With Custom Turn-On Lux, Colour, Logo and Packaging?

Yes, within the limits of each model’s options. The lux level is a configurable option on models such as the LT124L street light controller, which makes a custom lux level photocell a standard order rather than a development project.

For appearance and presentation, private label photocell manufacturer programmes usually cover:

Housing palette

Grey, yellow, transparent blue, black, brown, transparent, blue and green, with UV-stabilised PC covers and PBT bases.

Logotipo

Printed or molded, with options and minimums set per project.

Embalagem

Standard export packing or branded retail and bulk packaging, with label language and content per market.

Confirm marking methods and MOQs with Lead-Top before you commit to a design.

Which Interface Should You Choose: NEMA, Zhaga or Wire-In?

InterfaceProductsIdeal para
NEMA twist-lock (ANSI C136.10)LT110 / LT124L photocells with LT615-family 3-pin receptaclesStandard on/off switching
NEMA dimming receptacle (ANSI C136.41)Dimming photocontrol line with LT605 / LT605R / LT635 receptacles, 5-pin and 7-pinDimming; fixed, rotatable, or tool-free 360°
Zhaga Livro 18LT600 receptacle with LT6001 (0–10V) and LT6002 (DALI) controllersEuropean smart-ready programmes
Wire-in controllersLT310A (120–277V, IR sensor, >10,000 cycles) and LT210 thermal seriesLuminaire-internal mounting; DC versions for solar

Category discipline: receptacles, photo switch sensors, and controllers are different product classes. Customisation confirms interface and electrical requirements separately for each.

How Does the OEM Photocontrol Development Process Work?

Engineer holding a white twist-lock photocell beside CAD drawings on a monitor

For an ODM photocontrol receptacle supplier, the process runs in six steps:

  • Passo 1

Requirement discussion. Application, technical requirements, estimated quantity, and target market.

  • Etapa 2

Technical evaluation. The factory reviews electrical parameters, structure, interface, and feasibility.

  • Etapa 3

Sample development. Samples are prepared against confirmed requirements.

  • Passo 4

Sample testing and confirmation. You test them. Performance, structure, and appearance are then frozen.

  • Etapa 5

Mass production against the confirmed specification.

  • Step 6

Quality inspection and delivery.

Honest boundary

Development cycles, sample costs, and MOQs are set per project. We don’t quote fixed lead times before the evaluation.

What Should You Prepare Before Requesting a Quote?

A filled specification sheet gets a faster, more accurate answer.

InformationDetails to provideInformationDetails to provide
Required voltageAC or DC, supply window, frequencyCarga nominalLoad type and rating, LED driver class
Tipo de produtoTwist-lock, wire-in or ZhagaInterfaceNEMA C136.10 / C136.41 / Zhaga Book 18 / other
Controle de luzTurn-on lux, delay, fail modeProteção contra surtosMOV tier or surge level for the site’s exposure
AparênciaCover colour, base design, logoEmbalagemStandard or branded
QuantidadeInitial and annual estimateAplicativoStreet, area, parking, solar and so on

Which Applications Does the Custom Range Cover?

  • Street and roadway: 3-pin switching or 5/7-pin dimming packages.
  • Area, parking and industrial: higher-load models such as the LT134 (8A) and LT154 (programmable), with higher surge tiers.
  • Solar and low-voltage: LT104-DC (12–24VDC) and LT310A (12–48VDC) wire-in.
  • Smart-ready programmes: the Zhaga Book 18 package.

Each application ties a requirement (voltage, load, interface) to a product class. No product fits every scene.

Where Does Customisation Start?

For OEM photoelectric sensor programmes, customisation starts with the configurable families:

It extends through the receptacle and Zhaga lines

  • The LT615 family
  • LT605/LT605R/LT635
  • LT600/LT6001/LT6002

Perguntas frequentes

What is the MOQ for a custom twist-lock photocell?

It depends on the layer. Configuring existing options, such as lux level, delay, fail mode, or MOV tier through part-number suffixes, follows the base model’s standard MOQ. Structural or appearance development is quoted per project. Send your specification, and Lead-Top will confirm the tier.

Which parameters can be customised without new development?

On the LT124L, cover colour, turn-on lux level, time delay, fail mode, MOV tier, and IP rating are part-number options. On the LT310A, load class, zero-cross switching and fail mode are selection-code options. Everything else enters project evaluation.

Can you supply 220–230V, 50Hz markets?

Yes. Voltage options exist across the range, including an LT110 220V option, wide-window electronic models operating down to 80–90VAC, and DC versions for solar. Confirm the exact window and load against the configured model’s datasheet.

Can a photocell factory take ODM projects to my own design?

Lead-Top works from your technical specifications, product drawings, and estimated quantity. The six-step process above sets how an ODM project moves from requirements to production.

How long does OEM sample development take?

It depends on how far the request sits from an existing configurable model. Suffix-level configurations follow normal order lead time. New structures or electronics follow the development process, with a timeline set at technical evaluation. We don’t quote fixed periods beforehand.

What documents come with an OEM order?

A datasheet matching the exact configured part number, surge and endurance test reports on request, certification documents for the product family, and units individually marked with date and batch codes.

Palavras Finais

Most OEM requirements, from lux levels to MOV ratings and cover colours, are configuration options rather than new development. Share your project details with Chumbo-Top to identify the right solution. The engineering team will provide a configured part number, sample plan, and supporting test data.

Links externos

Facebook
Twitter
LinkedIn
WhatsApp
Foto de Sophia
Sofia

Olá, sou o autor deste post. Com 10 anos de experiência no setor de iluminação, sou apaixonado por inovação e conexão. Junte-se a mim para explorar insights do setor e moldar o futuro. Vamos iluminar juntos!

Obtenha um orçamento gratuito
Obtenha um orçamento gratuito

Deixe um comentário

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *

Inscreva-se na nossa lista de e-mails!

Mantenha-se informado com atualizações exclusivas.

“Para receber tendências do mercado de controle de luz, notícias do setor e lançamentos de novos produtos.”