Is Your Outdoor Lighting Costing You More Than It Should?

Outdoor lighting that turns on too late, fails after a single power surge, or burns out within a few years is not just an inconvenience — it is a liability. Whether you manage a city street network, a commercial parking lot, or a large industrial facility, unreliable photocontrols translate directly into higher maintenance costs, safety risks, and energy waste.

The **LEAD TOP LT154** was built to eliminate exactly these problems.

What the LT154 Does for You

Automatic, Precise Dusk-to-Dawn Control — No Manual Switching Required
The LT154 uses a sealed IR filter phototransistor to detect ambient light levels with high accuracy, automatically switching your lights ON at dusk (10–16 Lux) and OFF at dawn. The 1:1.5 ON/OFF ratio prevents nuisance cycling caused by passing clouds or headlights. You set it once — it works every night, year after year.

Protects Your Expensive LED Drivers from Burnout
LED luminaires and electronic ballasts generate powerful inrush currents at startup — a leading cause of premature driver failure. The LT154’s **Zero-Crossing Detection** technology synchronizes switching to the precise moment the AC voltage crosses zero, eliminating the destructive current spike entirely. Your drivers last longer, and your replacement costs go down.

Survives Voltage Surges That Would Destroy Ordinary Controls
Lightning strikes and grid transients are a fact of life for outdoor infrastructure. The LT154 is equipped with a **Metal Oxide Varistor (MOV) rated at 950 Joules and 10KV/5KA** — far exceeding the minimum requirement. It withstands five consecutive 10KV/5KA surges without failure. When the next storm hits, your photocontrols keep working.

Works Across Your Entire Lighting Infrastructure
Whether your site runs LED, HID, Induction, Fluorescent, or Halogen systems, the LT154 handles them all. With a wide operating voltage range of **105–305VAC at 50/60Hz** and a load rating of **1800VA**, a single product covers every fixture type across your facility — simplifying procurement, inventory, and installation.

Engineered to Last — Not Just to Pass a Test
Most photocontrols are rated for a few years. The LT154 is rated for **90,000 hours of design life** and **over 20,000 ON/OFF switching cycles** at full rated load. The FR4 fiberglass PCB is conformally coated on both sides to resist moisture absorption. The 3.0mm polypropylene housing is UV-stabilized and impact-resistant, passing a 1-meter concrete drop test without damage. This is a control built for the real world, not a laboratory.

Keeps Working in Extreme Conditions
From freezing winters to scorching summers, the LT154 operates reliably across a temperature range of **-40°C to +70°C**. The IP66-rated sealed housing (IP67 optional) keeps out dust, rain, and humidity — even in the most demanding outdoor environments.

Consumes Almost No Energy Itself
At **≤ 0.5 watts at 120VAC**, the LT154 draws virtually no standby power. Across a large installation of hundreds of luminaires, this adds up to meaningful energy savings over the product’s lifetime.

Fully Configurable to Your Project Requirements
No two projects are identical. The LT154 can be specified with your choice of housing color, turn-on light level, time delay, fail-safe mode, surge protection rating, and IP grade — all factory-configured to your exact requirements.

Technical Specifications at a Glance

—

Custom configurations available — contact us with your project specifications.*

—

Why Specifiers and Contractors Choose the LT154

> “A photocontrol failure means a service call, a lift truck, and a luminaire that was dark all night. The LT154’s 10-year warranty and 90,000-hour design life mean we specify it with confidence and our clients rarely call us back.”

The LT154 is the right choice when **reliability is not optional** — for municipal street lighting, large-scale commercial properties, critical security lighting, and any application where a failed photocontrol carries a real cost.

—

10-Year Limited Warranty** | One-for-one unit replacement
RoHS Compliant** | No lead, cadmium, mercury, or hexavalent chromium